Nitrile-calixarene grafted magnetic graphene oxide for removal of arsenic from aqueous media: Isotherm, kinetic and thermodynamic studies.

A novel adsorbent was developed based on nitrile functionalized calix [4]arene grafted onto magnetic graphene oxide (N-Calix-MGO) for remediation of arsenic (III) ions from aqueous media. The nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The effective parameters on adsorption efficiency such as pH, adsorbent dosage, contact time, initial concentration, and temperature were studied. The adsorption process was provided with a high removal efficiency up to (90%) at pH 6 which followed by IUPAC Type II pattern. The mathematical models of kinetics and isotherm validated the experimental process. The adsorption kinetic is followed pseudo-first-order model with R2 > 0.9. The adsorption equilibrium was well fitted on the Freundlich model (R2 ∼ 0.96) as compared Langmuir model (R2 ∼ 0.75). Hence, the Freundlich model suggested a multilayer sorption pattern with a physisorption mechanism for arsenic (III) uptake ono developed nanocomposite with a sorption capacity of 67 mg/g for arsenic. The Gibbs free energy (ΔG° < -20 kJ/mol) showed As(III) uptake ono N-Calix-MGO nanocomposite was the physical adsorption mechanism.

Conversion of waste frying oil into biodiesel using recoverable nanocatalyst based on magnetic graphene oxide supported ternary mixed metal oxide nanoparticles.

The magnetic graphene oxide (GO) supported with heterogeneous ternary mixed metal oxide (MMO) was used as nanocatalyst to enhance the conversion of waste frying oil (WFO) triglycerides to biodiesel via esterification process. In this regard, acidic MGO was modified with three basic metal cations of cerium, zirconium, and strontium oxides to produce heterogeneous MGO@MMO nanocatalyst. The nanocatalyst was characterized by FESEM, TEM, EDX and FTIR. The influence of different parameters such as catalyst material ratio, methanol to oil ratio, contact time, and reaction temperature was studied. Based on the results of effecting parameters, the MGO@MMO nanocatalyst converted WFO to biodiesel with a yield 94%, a reaction time of 90 min, methanol to oil ratio (8:1), and a temperature of 60 °C. Esterification mechanism indicated the MGO@MMO nanocatalyst having both binary Brønsted acid-base sites that increased the conversion yields as compared to MGO and MMO at low temperatures.

A green preconcentration method for determination of cobalt and lead in fresh surface and waste water samples prior to flame atomic absorption spectrometry.

Cloud point extraction (CPE) has been used for the preconcentration and simultaneous determination of cobalt (Co) and lead (Pb) in fresh and wastewater samples. The extraction of analytes from aqueous samples was performed in the presence of 8-hydroxyquinoline (oxine) as a chelating agent and Triton X-114 as a nonionic surfactant. Experiments were conducted to assess the effect of different chemical variables such as pH, amounts of reagents (oxine and Triton X-114), temperature, incubation time, and sample volume. After phase separation, based on the cloud point, the surfactant-rich phase was diluted with acidic ethanol prior to its analysis by the flame atomic absorption spectrometry (FAAS). The enhancement factors 70 and 50 with detection limits of 0.26 µg L(-1) and 0.44 µg L(-1) were obtained for Co and Pb, respectively. In order to validate the developed method, a certified reference material (SRM 1643e) was analyzed and the determined values obtained were in a good agreement with the certified values. The proposed method was applied successfully to the determination of Co and Pb in a fresh surface and waste water sample.